• NEW YEAR GOAL ACHIEVED. GOT MY BASIC DRONE PILOT LICENSE. I AM LEGALLY ALLOWED…
  19/2/2026

• ANOTHER SOLUTION FOR A COMMON PROBLEM. LIVING IN AN OLD HOUSE WITH SINGLE PANE…
  30/12/2025

• OMW TO TRAIN THE UK TEAM.
  3/3/2025

• FROM VIRTUAL TO REALITY. MAPPING THE PARK INDICATOR LIGHT OF A CESSNA 152 IN #MICROSOFTFLIGHTSIMULATOR TO AN LED LIGHT WITH #ARDUINONANO.
  5/1/2024

• FROM VIRTUAL TO REALITY. MAPPING THE PARK INDICATOR LIGHT OF A CESSNA 152 IN #MICROSOFTFLIGHTSIMULATOR TO AN LED LIGHT WITH #ARDUINONANO.
  5/1/2024

• PLAYING WITH AI. "A CUTE RED PEMBROKE WELSH CORGI WITH ITS PAWS ON THE STEERING…
  5/8/2023

• TESTING OUT THE BATTERY PACK. THE WIRES AND TERMINALS HEATED UP PRETTY SIGNIFIC…
  16/8/2022

• IT’S THURSDAY AGAIN. #PRIDEMONTH AT #WEWORK FOR @KLKTNOFFICIAL VANCOUVER TEAM!…
  2/6/2022

• THURSDAY IS VANCOUVER TEAMS WORK TOGETHER DAY. #WEWORK @KLKTNOFFICIAL
  19/5/2022

• WORK HARD PLAY HARD @KLKTNOFFICIAL SUMMIT
  19/4/2022

• DESIGNED AND PRINTED A NEW GEAR AND MOTOR MOUNT FOR THIS HAND CRANKING TURN TAB…
  23/3/2022

• PROTOTYPING AND DESIGNING A NEW TRACK AND CHASSIS SYSTEM FOR THE TANK. CAUSE LI…
  6/3/2022

• #3DPRINTING POOR MAN’S #HEATEDCHAMBER AT LEAST IT HELPS PREVENTING DRAFT CAUSED…
  27/2/2022

• A COLLECTIONS OF DIFFERENT STYLES TRANSFERRED TO THE SAME PHOTO. #JETSONXAVIER…
  17/9/2021

• ANOTHER #STYLETRANSFER. THE STYLE INPUT WAS A PAINTED BY COCO AND THE CONTENT.
  16/9/2021

• SALVAGED THESE 21700 #LIIONBATTERIES AND DRAFTED A BATTERY HOLDER IN #FUSION360…
  23/8/2021

• REHOUSING THE BATTERY PACK INTO A SECOND AMMO BOX. ALSO IN THE PROCESS OF BUILD…
  15/8/2021

• USE CASE NUMBER TWO FOR THE BATTERY PACK. CHARGING THE PINT.
  7/8/2021

• BUILT AN AMMO ENCLOSURE FOR THE 12V 3S10P #LIIONBATTERY TO BE USED WITH THE TRO…
  4/8/2021

• UPGRADING THE 3S6P TO 3S10P. THIS SHOULD HANDLE TURBO MODE FOR THE BARBIE CAR.…
  18/6/2021

• FIRST TRY OF THE #DIY18650BATTERY AND IT WORKS! UNFORTUNATELY WITH TURBO MODE I…
  9/6/2021

• AFTER A FEW TRIALS HERE IT GOES. FIRST BAR ON THE 3S6P BATTERY PACK. #18650 #NA…
  7/6/2021

• FINALLY GOT THE HANDHELD SPOTWELDER BACKED ON KICKSTARTER. IT WORKS! THIS IS A…
  28/5/2021

• DRY FITTING THE NEXT TWO BATTERY PACKS. #18650
  20/4/2021

• DISCHARGING THE BATTERY PACK TO TEST THE BMS. COULDN’T FIND A CHARGING CONTAINE…
  17/4/2021

• BUILT A TESTING 3S1P #LIIONBATTERY PACK. THE BMS IS ABIT RUDIMENTARY DOESN’T HA…
  15/4/2021

• HARVESTING AND BUILDING SOME BATTERY PACKS. STILL WAITING ON THE SPOT WELDER TO…
  11/4/2021

• PLAYING WITH NEURAL STYLE TRANSFER. COMBINING THE STYLE OF MACARONI WITH A SHAR…
  29/3/2021

• FASHIONMNIST TRAINING SET ON THE #JETSONNX WITH OUT #CUDA AND WITH #CUDA CALCUL…
  27/3/2021

• MY 32GB SDCARD KEEPS ON THROWING UP ERROR. IT’S TIME TO UPGRADE TO A SSD FOR TH…
  6/3/2021

• I AM VERY EXCITED TO BE GETTING THIS THING IN THE MAIL TODAY!! #NVIDIA #JETSONX…
  4/3/2021

• JUST A QUICK UPDATE ON THE #COREXY #HYPERCUBE. I AM MISSING LAST FRAME FOR THE…
  11/2/2021

• TRYING OUT THE #ETCHASKETCH BIT AFTER SOME TUNING. LOOKS LIKE THE DIALS WILL HA…
  8/2/2021

• SPENT SOME TIME PLAYING WITH THIS DEVELOPOWER V4 #CNC BOARD. COULDN’T REALLY FI…
  7/2/2021

• THE #COREXY IS TAKING SHAPE.
  24/1/2021

• #EGGBOT FINALLY COMPLETED. STILL NEED TO CALIBRATE A FEW MORE THINGS.
  23/1/2021

• SWAPPED OUT THE OLD CONTROLLER WITH THE NEW @BIGTREETECH SKR V1.3. TRYING TO PR…
  20/1/2021

• V1 VS THE ORIGINAL DESIGN. STILL GOTTA WORK OUT ABIT OF KINKS. THE SERVO WAS TU…
  4/1/2021

• DESIGNING A NEW Z AXIS FOR THE TIMSAV. #FUSION360
  2/1/2021

• WANTED TO SEE HOW BIG I COULD PLOT WITH THE #TIMSAV NEEDLE CUTTER. FULL 20IN BY…
  19/12/2020

• FINALLY FOUND SOME TIME TO FIX UP THE ERC TIMSAV AGAIN. THIS TIME FIXED THE WOB…
  2/12/2020

• DIY #ONEWHEELPINT #HYPERCHARGER FROM A BENCH TOP POWER AT 32V 6A. BOOSTED UP TO…
  13/9/2020

• #SLOWMOTION #HELICOPTER LANDING.
  8/9/2020

• I HAVE ALWAYS WANTED TO FILM THE NIGHT SKY OBJECT WITH A PROPER TELESCOPE SET.…
  5/6/2020

• REDESIGNED A NEW FENDER IN #FUSION360 FOR THE #ONEWHEELPINT AND #3DPRINTED IT.…
  26/5/2020

• #ELWIRE ON THE PINT. IT WAS HARD TO KEEP THE TENSIONING OF THE WIRE TO STAY ON…
  26/5/2020

• DESIGNED A NEW TELESCOPE MOUNT TO FIT THE OLD TRIPOD. THIS MADE TRACKING EASIER…
  9/5/2020

• DESIGNED IN #FUSION360 AND #3DPRINTED AN ADAPTOR RING FOR THIS DINGY WEBCAM. TU…
  7/5/2020

• DESIGNED THIS POV BATTERY HOLDER IN #FUSION360 AND #3DPRINTED IT. NOW I CAN USE…
  30/4/2020

• FIRST TIME DESIGNING A ELECTRONIC ENCLOSURE IN FUSION 360. POC PRINT. IT’S FOR…
  26/4/2020

• FINISHING UP THE #3DPRINTED TANK WITH A COVER. EVERYTHING IS ORGANIZED NICELY I…
  21/4/2020

• A FEW MORE VIDEO OF THE PRINTED TANK. IT GETS STUCK IN THE SAND EASILY. GONNA H…
  11/4/2020

• #3DPRINTED DIY TANK CROSSING A WOODEN BRIDGE! THIS WAS A PROJECT THAT I ALWAYS…
  9/4/2020

• #3DPRINTED #COVID19 FACE SHIELD
  8/4/2020

• #3DPRINTED THIS LAMP ARM TO TEST OUT THE WEBCAM RIG FOR PRINT MONITORING AND #T…
  30/3/2020

• #ARDUINO READING AND PLOTTING THE PWM INPUT OF #SPEKTRUMRC RECEIVER.
  29/3/2020

• MORE #3DPRINTED #DUPLO COMPATIBLE TRACKS AND TRUSS FOR #MODELTRAIN. ENABLES NEW…
  28/3/2020

• #3DPRINTING OF THESE SUPER CUTE CONTAINER SHOP AND CONTAINERS. THE BOAT FLOATS…
  23/3/2020

• #3DPRINTED MY NEXT FENDER FOR #ONEWHEELPINT IN #FLOURESCENT FILAMENT. #GLOWINTH…
  11/2/2020

• #LASTDAY AT @TASKTOP THANK YOU FOR ALL THE EXPERIENCES. KEEP ON KEEPING ON. #LE…
  8/2/2020

• GOT MY FIRST #NOSEDIVE ON THE #ONEWHEELPINT TODAY. WASN’T ABLE TO RUN IT OFF BU…
  7/2/2020

• #3DPRINTED #ONEWHEELPINT FENDER MOUNTED. NOT GONNA LIE. THIS IS PROBABLY THE UG…
  7/2/2020

• #3DPRINTED THE FENDER FOR THE #ONEWHEELPINT DOING A DRY FITTING TO SEE HOW THIN…
  6/2/2020

• #3DPRINTED #ONEWHEELPINT BASE FENDER BRACKET VS THE STOCK ONE. MOUNTED.
  3/2/2020

• #3DPRINTED THE FENDER BASE FOR THE #ONEWHEELPINT THE FRAME IS TOO BIG FOR MY #C…
  2/2/2020

• #ONEWHEELPINT CAR MOUNTING BASE PRINTED. TOOK 24 HRS. GONNA START A NEW FENDER…
  30/1/2020

• #3DPRINTING A MINI FENDER FOR #ONEWHEELPINT. THE TREE SUPPORT MAKES IT LOOK LIK…
  27/1/2020

• WIP FT MINI ARROW CUT WITH NEEDLE CUTTER AND 3D PRINTED PLA FUSELAGE
  3/1/2020

• CUTTING OUT SOME FOAM BOARD #UNICORN AND #STEGOSAURUS
  28/12/2019

• FIRST #BENCHY. TOOK ME LONG ENOUGH TO PRINT ONE. THE TREES SUPPORT LOOKS LIKE S…
  23/12/2019

• #CHUCKGLIDER
  9/12/2019

• #NEEDLECUTTER #TIMELAPSE #CHUCKGLIDER
  7/12/2019

• #NEEDLECUTTER
  5/12/2019

• #NEEDLECUTTER TESTING. FREEHAND #3DPRINTED
  18/11/2019

• #NEEDLECUTTER UPDATES. #3DPRINTING.
  15/11/2019

• #3DPRINTING #MAKER #NEEDLECUTTER
  11/11/2019

• #WIP DIY CNC NEEDLE CUTTER FROM ERC. STILL WAITING FOR THE EXTRUDER AND OTHER P…
  4/11/2019

• DESIGNED THIS #SAILORMOON CROWN USING #BLENDER AND #3DPRINTED IT. IT’S GOING TO…
  22/10/2019

• REPRINTED THE #DODECAHEDRON AS SOLID.
  12/10/2019

• USING #OPENSCAD TO GENERATE A #DODECAHEDRON THEN WIREFRAME IT WITH #BLENDER, SL…
  11/10/2019

• #NERFMODS #NERFSIGHT #3DPRINTING WORKS LIKE THE REAL THING. LOVE THE PRECISION…
  10/10/2019

• #3DPRINTING #GHOST SUCH A CUTE MODEL. THANKS TO YAHOO JAPAN ON THINGIVERSE!
  7/10/2019

• #3DPRINTING I MISTAKENLY PRINTED THE ALLIGATOR WITH THE WRONG FAILMENT DIAMETER…
  4/10/2019

• TODAY’S VIEW. ON-SITE INTERVIEWING CANDIDATES. #VANHACK
  1/10/2019

• #PLA #KNOB #3DPRINTING #CR10
  29/9/2019

• #3DPRINTING #SKULL #SLUG #GLOWINTHEDARK
  29/9/2019

• #3DPRINTER #CREATLYCR10 SECOND PRINTER ONLINE.
  26/9/2019

• #TREX #3DPRINTING #DELTAPRINTER
  24/9/2019

• #3DPRINTING #SNAIL #DELTAPRINTER
  23/9/2019

• #3DPRINTING #DELTAPRINTER #DRAGON
  23/9/2019

• #3DPRINTING #IPHONECASE #DELTAPRINTER I LIKE HOW THIS PRINT TURNED OUT. I REALL…
  18/9/2019

• #DELTAPRINTER #3DPRINTING #CACTUS THANK@YOU @JOHNBIEHLER SUCH A CUTE MODEL!
  17/9/2019

• #BULLDOG #3DPRINTING #DELTAPRINTER
  16/9/2019

• #HEXAPOD #3DPRINING #WIP
  13/9/2019

• #HEXAPOD #3DPRINTING #SERVOLEGS
  7/9/2019

• #TREX #3DPRINTING #TREXSKULL #DELTAPRINTER
  5/9/2019

• #FLEXIREX #3DPRINTING #DELTAPRINTER #PINKFILAMENT
  3/9/2019

• GOT THE BLTOUCH WORKING WITH THIS OLDER VERSION OF GT2650 REV A #DELTAPRINTER #…
  15/8/2019

• #DELTAPRINTER FINALLY GOT TIME TO FIX THIS ONE UP. #3DPRINTING
  11/8/2019

• HAPPY FLYING. I MEAN CRASHING.
  30/6/2019

• #AIRHOGS #AIRHOGSTITAN #RCAIRPLANE #MODDEDPLANE #CHUCKGLIDER #FOAMIE THE MOTOR…
  7/1/2019

• #AIRHOGS #AIRHOGSTITAN #RCAIRPLANE #MODDEDPLANE #CHUCKGLIDER #FOAMIE IT FLEW!!
  30/12/2018

• #FTEXPLORER #FOAMCORE #MAIDEN #RCAIRPLANE IT FLEW!
  24/12/2018

• ANOTHER ONE DONE. MAIDEN WHEN WEATHER PERMITS. #FLITETESTFOAM
  22/12/2018

• #FOAMIE #AIRHOG #TITAN #MOD #CRASH #REMOTECONTROL
  18/11/2018

• #REMOTECONTROL #AIRHOG #TITAN #GLIDER MODDED.
  27/10/2018

• #FTNUTBALL MK. II #RCAIRPLANE #RCFOAM
  13/8/2018

• #SCRATCHBUILD #FOAMPLATE #MICROFLYER #NUTBALL #RCAIRPLANE
  7/8/2018

• #FTMINIARROW #REBUILT #MAIDEN #RCAIRPLANE #RCFOAMPLANE
  5/8/2018

• #DUPLOTRAIN #SCRATCHBUILD #RCAIRPLANE #DELTAWING #KFFOIL #SLOWMOTION #LAUNCHRAI…
  5/7/2018

• #GOPHERFEST #HOOTSUITE #GOLANG
  16/5/2017

• #DEVOPS #BCTECH #ELASTICPATH #HOOTSUITE #ITLIFE #CRAFTYPENGUINS
  22/3/2017

• #DOCKER #MEETUP #HOOTSUITE #IUSELINUX
  16/2/2017

• #STARTUPLIFE #LIGHTHOUSELABS #BRATWRUST IOS DINNER SYMPOSIUM.
  22/9/2016

• THX VIV FOR THIS AWESOME GITHUB WORKING DAD STICKER. LOVE IT! #GITHUB #STICKER…
  17/5/2016